Sitelab's UVF-500D analyzer,
part no. 50200, is a
rugged, battery operated,
low cost handheld instrument which features two optical
channels. It's made for Sitelab by Turner Designs, Inc. and is a
for the older TD-500D model. The UVF-500D is sold online and
distributed with our partner company, Obstitech ApS in Denmark. A
full line of test supplies and accessories are available too.
To order or get pricing, please
The UVF-500D uses ultraviolet
fluorescence to detect petroleum hydrocarbons in the C15 to C50 "oil
and grease" range.
Use on-site to monitor produced water, discharge
water, bildge water and waste water contaminated by crude oil and
heavy fuels oils. Samples are extracted in solvent and only
take a few minutes to analyze. Soils and sediments can also be
Analyzer is shipped factory
calibrated using Sitelab's TPH-Oil Calibration kit, part no.
CAL-056H-500D. Test results compare
well to EPA Method 1664, 9071B and other gravimetric methods. Includes
batteries, cuvette adapter and a 100 ppm TPH Solid Standard.
Procedures and supplies are available too to calibrate the analyzer
using oil from your site. It's easy to do. See PDF files
listed below for technical
>UVF-500D OPERATING MANUAL
>UVF-500D INSTRUMENT SPECIFICATIONS
>WATER TEST KIT PROCEDURES: CLEAN/LESS OILY WATER
>WATER EXTRACTION KIT PROCEDURES: DIRTY/OILY WATER
>CALIBRATION KIT: CAL-056H-500D
>SOIL EXTRACTION KIT PROCEDURES: OIL IN SOIL
>CALIBRATION KIT: CAL-056M-500D